The MOT Files

Known faults, from the test record

Kia Proceed common problems

What fails on the Kia Proceed at MOT, which parts are behind it, and how each model year compares. From 7,335 DVSA test records.

Data updated

Quick answer

The Kia Proceed's most common MOT problems are tyres, suspension bushes, wiper blades and washers, recorded in 55.1%, 21.0% and 19.1% of failed tests respectively. By model year, 2022 cars pass most often (87.8%) and 2019 cars least (82.1%), though most of that gap is age. Every figure here is what testers recorded, not what owners reported.

A “common problems” list is usually a forum thread: whoever had the worst day writes the longest post. This one is built the other way, from every Kia Proceed that took an MOT last year and what the tester wrote down. It cannot see breakdowns, electrical gremlins or a gearbox that hunts, because the test does not check those. What it can see, it sees across 7,335 cars.

By component

What wears out on a Proceed

Failure items grouped by the part behind them, with the share of failed Kia Proceed tests recording each. A part can carry several DVSA wordings; they are listed beneath. One failed test often lists several items, so shares do not sum to 100%.

  1. 1.Tyres

    55.1% of failed tests

    Tread wears with every mile and sidewalls age and take kerb damage; the legal minimum is 1.6 mm across the central three-quarters.

    • Tyre tread depth not in accordance with the requirementsexplained18.0%
    • A tyre cords visible or damagedexplained17.1%
    • A tyre seriously damagedexplained11.6%
    • A tyre seriously damagedexplained3.4%

    Across all cars, tyres failures run at a similar rate at every age, because they are replaced on a cycle rather than wearing out with the car. How long tyres last

  2. 2.Suspension bushes

    21.0% of failed tests

    Rubber bushes in arms and links perish and split with age and load; the most recorded suspension item on the test.

    • A suspension pin, bush or joint excessively wornexplained7.8%
    • A suspension pin, bush or joint excessively wornexplained3.5%
    • A suspension joint dust cover missing or no longer prevents the ingress of dirt etcexplained2.6%
    • A suspension pin, bush or joint excessively wornexplained2.6%

    Across all cars, suspension bushes failures climb 20-fold between three and fifteen years, peaking at 15+ years. How long suspension bushes last

  3. 3.Wiper blades and washers

    19.1% of failed tests

    Rubber blades harden and split within a year or two; washer jets block and pumps fail.

    • Wiper blade missing or obviously not clearing the windscreenexplained11.1%
    • Windscreen washers not working or not providing sufficient fluid to clear the windscreenexplained5.2%
    • Windscreen washers not working or not providing sufficient fluid to clear the windscreenexplained2.8%

    Across all cars, wiper blades and washers failures run at a similar rate at every age, because they are replaced on a cycle rather than wearing out with the car. How long wiper blades and washers last

  4. 4.Bulbs and lamps

    17.3% of failed tests

    Filament bulbs simply expire; the cheapest and most avoidable failure on the test, and one of the most recorded.

    • A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioningexplained5.5%
    • A headlamp or light source missing, inoperative or more than ½ not functioning in the case of LEDexplained5.2%
    • Stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioningexplained4.1%
    • A rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lampsexplained1.2%

    Across all cars, bulbs and lamps failures climb 15-fold between three and fifteen years, peaking at 15+ years. How long bulbs and lamps last

  5. 5.Brake pads and shoes

    16.4% of failed tests

    Friction material wears with use; the MOT limit is 1.5 mm and a pad that thin is close to metal on metal.

    • a brake lining or pad worn below 1.5mmexplained16.4%

    Across all cars, brake pads and shoes failures run at a similar rate at every age, because they are replaced on a cycle rather than wearing out with the car. How long brake pads and shoes last

  6. 6.Parking brake

    12.4% of failed tests

    Cables stretch and seize, rear shoes and adjusters wear; efficiency is measured on the roller tester against the vehicle's weight.

    • Parking brake efficiency below minimum requirementexplained6.0%
    • Parking brake inoperative on one sideexplained3.2%
    • Parking brake lever has excessive movement indicating incorrect adjustmentexplained1.8%
    • Parking brake efficiency less than 50% of the required valueexplained1.3%
  7. 7.Brake discs

    10.3% of failed tests

    Discs thin with each pad set and pit or corrode when lightly used; failure is for significant wear, fracture or insecurity, advisory for surface condition.

    • Brake disc or drum significantly and obviously wornexplained5.5%
    • Brake disc or drum excessively weakened, insecure or fracturedexplained2.5%
    • Excessive fluctuation in brake effort through each wheel revolution.explained2.3%

    Across all cars, brake discs failures climb 3-fold between three and fifteen years, peaking at 12–14 years. How long brake discs last

  8. 8.Headlamp aim

    7.5% of failed tests

    Aim drifts with sagging suspension, a knocked lamp or a botched bulb change; adjustment, not a part.

    • The aim of a headlamp is not within limits laid down in the requirementsexplained3.8%
    • The aim of a headlamp is not within limits laid down in the requirementsexplained2.3%
    • The aim of a headlamp is not within limits laid down in the requirementsexplained1.4%

By registration year

Proceed problems by year

MOT pass rate for Kia Proceed cars by the year they were first registered, from years with at least 1,000 tests. Every car in a row is the same age, so the rate is raw. Neighbouring years differ by a year of wear — a step of a point or two is age. The step at 2022, up 4.6 points, is larger than wear explains and most likely marks a change in the cars themselves.

201982%
202183%+1.1
202288%+4.6

Last column: change on the previous year, in points. Years registered within the last three years have not yet been tested and are not shown.

Before it fails

What testers warn Proceed owners about

Advisories are the same parts a year or two earlier. Share of all Kia Proceed tests carrying an advisory for each.

Go deeper

The rest of the Proceed file

Common questions

What are the most common problems with a Kia Proceed?
Going by what fails the MOT, tyres (recorded in 55.1% of failed tests), suspension bushes (recorded in 21.0% of failed tests), and wiper blades and washers (recorded in 19.1% of failed tests). These are the items testers actually record across 7,335 tests, not reports from owners, so they describe what goes wrong at the point where it has to be fixed.
Which Kia Proceed year is the most reliable?
By MOT pass rate, Kia Proceed cars registered in 2022 do best at 87.8% and 2019 cars do worst at 82.1%. Most of that ordering is simply age — newer cars pass more — so read the year table for steps larger than a couple of points between neighbouring years; those mark a change in the cars rather than the calendar. The largest such step is at 2022, up 4.6 points on 2021.
Is the Kia Proceed reliable?
Adjusted for the age and mileage of the cars tested, the Kia Proceed passes 68.1% of MOTs against a national 72.3%. An MOT measures roadworthiness on the day rather than breakdowns or running costs, so this is a reliability measure in the narrow sense: how often the car meets the legal standard, and what stops it.
What should I check when buying a used Kia Proceed?
Start with what fails most: tyres, suspension bushes, wiper blades and washers. Then read the car's own MOT history for advisories carried year to year without repair — the model tells you what to expect, the history tells you whether this owner dealt with it.

Analysis built from DVSA data of