Motorcycle reliability file
Honda ST1300 MOT pass rate & common failures
From 1,881 recorded MOT tests of the Honda ST1300, published by DVSA.
Data updated
Quick answer
The Honda ST1300 passes 88.9% of MOT tests, against 86.5% for all motorcycles. The most recorded failure is "Brake lining or pad worn below 1.0mm", in 31.4% of failed tests.
At a glance
Recorded pass rate
2.4 points above the fleet average of 86.5%. The examples tested do not cover a wide enough spread of ages and mileages to compare fairly against the rest of the fleet, so no rank is claimed; the failure record below stands on its own.
DVSA recorded wording
Most common failure items
Share of failed Honda ST1300 tests in which each item was recorded. One failed test often lists several, so these do not sum to 100%.
- 1.Brake lining or pad worn below 1.0mm31.4%
48 occurrences
- 2.A shock absorber not functioning or leaking severely27.5%
42 occurrences
- 3.Tyre tread depth not in accordance with the requirements24.8%
38 occurrences
- 4.Significant brake effort recorded with no brake applied indicating a binding brake11.1%
17 occurrences
- 5.A stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released9.2%
14 occurrences
- 6.Stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning5.9%
9 occurrences
- 7.Significant brake effort recorded with no brake applied indicating a binding brake5.9%
9 occurrences
- 8.A headlamp missing, inoperative or more than ½ not functioning in the case of LED5.2%
8 occurrences
- 9.Brake efficiency below minimum requirement4.6%
7 occurrences
- 10.Projected beam image is obviously incorrect4.6%
7 occurrences
- 11.Contaminated with oil, grease etc3.9%
6 occurrences
- 12.A brake lining or pad contaminated with oil, grease etc3.9%
6 occurrences
Warnings without a failure
Most common advisories
Share of all Honda ST1300 tests carrying each advisory.
- 1.Brake lining or pad worn below 1.0mm9.7%
182 tests
- 2.Tyre tread depth not in accordance with the requirements8.8%
165 tests
- 3.A shock absorber not functioning or leaking severely5.6%
105 tests
- 4.Brake disc or drum excessively weakened, insecure or fractured3.1%
58 tests
- 5.Brake disc or drum significantly and obviously worn2.7%
51 tests
- 6.Significant brake effort recorded with no brake applied indicating a binding brake2.7%
50 tests
- 7.Excessive fluctuation in brake effort through each wheel revolution2.3%
43 tests
- 8.Tyre tread depth not in accordance with the requirements1.6%
30 tests
What gets tested
The ST1300 fleet
- Average mileage recorded at test
- 47,884
- Test classes
- class 2: 1,881
Names grouped into this model (1)
- ST1300 A
Compare within the range
Other Honda motorcycles
Common questions
- What is the MOT pass rate for a Honda ST1300?
- 88.9% unadjusted, from 1,881 DVSA tests. The average across all motorcycles is 86.5%.
- What does a Honda ST1300 fail its MOT on?
- "Brake lining or pad worn below 1.0mm" is recorded in 31.4% of failed Honda ST1300 tests, followed by "A shock absorber not functioning or leaking severely" (27.5%). One failed test often lists several items.
- What mileage does a Honda ST1300 usually have at its MOT?
- 47,884 miles on average across every age tested, so a description of the fleet rather than an annual figure. Motorcycle mileages are low and vary enormously with use; a commuter bike and a weekend bike of the same age can differ by a factor of ten.
Analysis built from DVSA data of