Section 4 · Lamps, reflectors and electrical equipment
4.4.2 Switching
Manual indexed
Quick answer
Sub-section 4.4.2 of the MOT inspection manual covers switching and lists 2 defects. A reference like "(4.4.2 (a)(i))" on a certificate points to the matching row below. The most recorded is "Indicator or hazard warning switch inoperative", about 0.1 times per 100 failed tests.
Official wording
The defect clauses
- 4.4.2 (a)(i)Minorunder 0.1 per 100 fails
Indicator or hazard warning switch does not operate in accordance with the requirements
- 4.4.2 (a)(ii)Major0.1 per 100 fails
Indicator or hazard warning switch inoperative
Wording and categories reproduced from the DVSA inspection manual under the Open Government Licence. Frequencies are items per 100 failed class 4 tests across the DVSA anonymised MOT dataset; a clause with no figure was not recorded often enough to appear in any model’s top forty failure items. 0 of 2 clauses link to our own explanation.
Grading
What the categories mean
- Dangerous
- a direct and immediate risk to road safety or the environment. The vehicle fails and must not be driven until repaired, even to a garage.
- Major
- a defect that affects safety, the environment or other road users. The vehicle fails.
- Minor
- a defect with no significant effect on safety or the environment. Recorded on the certificate; the vehicle passes.
Section 4
Other sub-sections of lamps, reflectors and electrical equipment
- 4.1.1Presence, condition and operation
- 4.1.2Headlamp alignment
- 4.1.3Switching
- 4.1.4Compliance with requirements
- 4.1.5Levelling devices
- 4.1.6Headlamp cleaning devices
- 4.2.1Presence, condition and operation
- 4.2.2Switching
- 4.2.3Compliance with requirements
- 4.3.2Switching
- 4.3.3Compliance with requirements
- 4.4.1Presence, condition and operation
- 4.4.3Compliance with requirements
- 4.4.4Flashing frequency
- 4.5.1Presence, condition and operation
- 4.5.3Switching
- 4.6.1Condition and operation
- 4.6.2Compliance with requirements
- 4.6.3Switching
- 4.7.1Presence, condition and operation
- 4.7.2Compliance with requirements
- 4.8.1Presence, condition and operation
- 4.8.2Compliance with requirements
- 4.9.1Presence, condition and operation
- 4.9.2Compliance with requirements
- 4.10Trailer electrical socket
- 4.11Electrical wiring
- 4.13Battery(ies)
Common questions
- What does 4.4.2 mean on an MOT certificate?
- It refers to sub-section 4.4.2 of the MOT inspection manual, "Switching", within section 4, lamps, reflectors and electrical equipment. The letter or letters after it — (a), (b)(i) and so on — identify the specific defect from the 2 listed here. 1 Major and 1 Minor.
- Which switching defect is recorded most often?
- "Indicator or hazard warning switch inoperative" (4.4.2 (a)(ii)), recorded about 0.1 times per 100 failed MOT tests nationally.
- Does a Minor defect fail the MOT?
- No. a defect with no significant effect on safety or the environment. Recorded on the certificate; the vehicle passes. Major and Dangerous defects fail. A Dangerous defect also means the car must not be driven until it is repaired.