Section 6 · Body, structure and attachments
6.2.2 Cab and body mounting
Manual indexed
Quick answer
Sub-section 6.2.2 of the MOT inspection manual covers cab and body mounting and lists 7 defects, 3 of them Dangerous. A reference like "(6.2.2 (a)(i))" on a certificate points to the matching row below. The most recorded is "A body or cab insecure", about 0.0 times per 100 failed tests.
Official wording
The defect clauses
- 6.2.2 (a)(i)Majorunder 0.1 per 100 fails
A body or cab insecure
- 6.2.2 (a)(ii)Dangerous
A body or cab insecure to the extent that stability is seriously impaired
- 6.2.2 (b)Major
A body or cab obviously not squarely located on chassis
- 6.2.2 (c)(i)Major
Body or cab mounting fixings missing or insecure such that overall security is significantly reduced
- 6.2.2 (c)(ii)Dangerous
Body or cab mounting fixings missing or insecure such that stability is seriously impaired
- 6.2.2 (d)(i)Major
Body, cab or chassis excessively corroded at mounting points
Corrosion in a structural area explained: what it means and what puts it right
- 6.2.2 (d)(ii)Dangerous
Body, cab or chassis corroded at mounting points to the extent that overall security or stability is seriously impaired
Corrosion in a structural area explained: what it means and what puts it right
Wording and categories reproduced from the DVSA inspection manual under the Open Government Licence. Frequencies are items per 100 failed class 4 tests across the DVSA anonymised MOT dataset; a clause with no figure was not recorded often enough to appear in any model’s top forty failure items. 2 of 7 clauses link to our own explanation.
Grading
What the categories mean
- Dangerous
- a direct and immediate risk to road safety or the environment. The vehicle fails and must not be driven until repaired, even to a garage.
- Major
- a defect that affects safety, the environment or other road users. The vehicle fails.
- Minor
- a defect with no significant effect on safety or the environment. Recorded on the certificate; the vehicle passes.
Section 6
Other sub-sections of body, structure and attachments
- 6.1.1General condition
- 6.1.2Exhaust system
- 6.1.3Fuel system
- 6.1.4Bumpers
- 6.1.5Spare wheel carrier (if fitted)
- 6.1.6Coupling mechanisms and towing equipment
- 6.1.7Transmission
- 6.1.8Engine mountings
- 6.2.1Body condition
- 6.2.3Doors and door catches
- 6.2.4Floor
- 6.2.5Driver’s seat
- 6.2.6Passenger seats
- 6.2.7Driving controls
- 6.2.8Cab steps (if fitted)
- 6.2.12Handgrips and footrests
Common questions
- What does 6.2.2 mean on an MOT certificate?
- It refers to sub-section 6.2.2 of the MOT inspection manual, "Cab and body mounting", within section 6, body, structure and attachments. The letter or letters after it — (a), (b)(i) and so on — identify the specific defect from the 7 listed here. 3 of them are graded Dangerous, 4 Major and 0 Minor.
- Which cab and body mounting defect is recorded most often?
- "A body or cab insecure" (6.2.2 (a)(i)), recorded about 0.0 times per 100 failed MOT tests nationally.
- Does a Minor defect fail the MOT?
- No. a defect with no significant effect on safety or the environment. Recorded on the certificate; the vehicle passes. Major and Dangerous defects fail. A Dangerous defect also means the car must not be driven until it is repaired.