Section 1 · Brakes
1.1.18 Brake slack adjuster
Manual indexed
Quick answer
Sub-section 1.1.18 of the MOT inspection manual covers brake slack adjuster and lists 3 defects. A reference like "(1.1.18 (a))" on a certificate points to the matching row below.
Official wording
The defect clauses
- 1.1.18 (a)Major
Adjuster damaged, seized or having abnormal movement, excessive wear or incorrect adjustment
- 1.1.18 (b)Major
Adjuster defective
- 1.1.18 (c)Major
Incorrectly installed
Wording and categories reproduced from the DVSA inspection manual under the Open Government Licence. Frequencies are items per 100 failed class 4 tests across the DVSA anonymised MOT dataset; a clause with no figure was not recorded often enough to appear in any model’s top forty failure items. 0 of 3 clauses link to our own explanation.
Grading
What the categories mean
- Dangerous
- a direct and immediate risk to road safety or the environment. The vehicle fails and must not be driven until repaired, even to a garage.
- Major
- a defect that affects safety, the environment or other road users. The vehicle fails.
- Minor
- a defect with no significant effect on safety or the environment. Recorded on the certificate; the vehicle passes.
Section 1
Other sub-sections of brakes
- 1.1.1Service brake pedal or hand lever pivot
- 1.1.2Service brake pedal or hand lever condition and travel
- 1.1.3Air and vacuum systems
- 1.1.4Low-pressure warning
- 1.1.5Hand operated brake control valve
- 1.1.6Parking brake lever or control
- 1.1.7Brake valves
- 1.1.9Pressure storage reservoirs
- 1.1.10Brake servo units and master cylinder (hydraulic systems)
- 1.1.11Rigid brake pipes
- 1.1.12Flexible brake hoses
- 1.1.13Brake linings and pads
- 1.1.14Brake discs and drums
- 1.1.15Brake cables, rods, levers and linkages
- 1.1.16Brake actuators - including spring brakes, hydraulic cylinders and callipers
- 1.1.17Load sensing valve
- 1.1.19Additional braking device (retarder), if fitted
- 1.1.21Complete braking system
- 1.2.1Performance
- 1.2.2Efficiency
- 1.3.1Performance
- 1.3.2Efficiency
- 1.4.1Performance
- 1.5Additional braking device (retarder) performance
- 1.6Anti-lock braking system (ABS)
- 1.7Electronic braking system (EBS)
- 1.8Brake fluid
Common questions
- What does 1.1.18 mean on an MOT certificate?
- It refers to sub-section 1.1.18 of the MOT inspection manual, "Brake slack adjuster", within section 1, brakes. The letter or letters after it — (a), (b)(i) and so on — identify the specific defect from the 3 listed here. 3 Major and 0 Minor.
- Which brake slack adjuster defect is recorded most often?
- None of the clauses in this sub-section appears among the most-recorded failure items nationally; they are rare in practice.
- Does a Minor defect fail the MOT?
- No. a defect with no significant effect on safety or the environment. Recorded on the certificate; the vehicle passes. Major and Dangerous defects fail. A Dangerous defect also means the car must not be driven until it is repaired.